OUR SERVICES
Market and Regulatory
Technical Due Diligence
Network Access applications
Power Purchase agreements
Asset Valuations
Regulatory advice
Asset Management
- Asset Strategy and Performance
- Operations and Maintenance Solutions
Asset Management Strategy & Planning
Asset Management
Decision Making
- Operational Optimization
- Life Cycle Planning
Asset Information
- Condition Assessment
Risk & Review
Design Phases
- Pre Feasibility Studies
- Feasibility Studies
- Concept Designs
- Detailed Engineering
Design Services
Energyze has developed a strong track record in the strategic planning, feasibility development, detailed design and construction supervision of transmission systems at all voltages up to 500 kV. Our personnel have completed transmission system consultancies all over Australia and the Asia Pacific region.
- Route & conductor selection
- Line optimisation
- Development of transmission line standards
- Transmission structure analysis/design (PLS-POLE, PLS-TOWER / Microstran)
- Transmission line analysis/design (PLS-CADD)
- Civil & Structural Design
- Transmission line performance analysis
- System efficiency & loss reduction programmes
- Engineering, procurement & construction supervision
- Economic, environmental & social analyses
- Failure Investigations
- Power system master planning
- Sub-soil investigation & earthing systems
- HV Cable Design
- Tariff studies
- Transmission line uprating investigations
Energyze personnel have successfully worked on numerous substation engineering assignments. We provide the full spectrum of services for Substations and Switchyards including Primary design, Secondary design, Civil, Structural and Ancillary services.
We have worked on all systems ranging from Medium Voltage to Extra High Voltage (upto 765kV) as well as High Voltage DC (HVDC).
Some key services we offer in substation design include:
- Site selection and Switchyard design
- Computerised control substation design
- Conceptual design & layout
- Protection design & fault analysis
- Control & automation system design
- Earthing system design
- Lightning protection system design
- SCADA & Telecommunications
- Economic Analysis
- Engineering, procurement & construction supervision
- Power system master planning
- HV Cable Design
- Fire and Hydraulics
- Footing and Bund designs
- Building and Structure designs
- Lighting and Access control design
Energyze personnel have delivered engineering services for power distribution design in various areas including distribution network reinforcement, customer funded designs, cable feeder exits ratings study, designs for sub-division of residential blocks and construction camps, distribution designs for mine and port facilities, project management of new substations and other electrical facilities.
Our Key services include:
Distribution Load Flow analysis
Distribution line design
Power Cable Operational Ratings Analysis
Distribution systems design & specification
Residential & industrial subdivision design
Supplies to industrial loads
Protection design & fault analysis
Engineering, procurement & construction supervision
Distribution standards development
Rural electrification & site camps
Remote Area Power Systems
Wind farm electrical systems design
Generation interconnection
Regulatory affairs
Asset Management services
Economic analysis
- Earth Potential Rise (EPR) evaluation
- Step, touch and transfer voltage assessments
- Low Frequency Induction (LFI) assessments
- Electromagnetic Interference (EMI) studies
- Electric/magnetic field exposure (EMF) studies
- Earthing and Bonding for traction systems
- Electrolysis assessment – stray DC current analysis & earthing system design
- Corrosion assessments, monitoring and management We use industry leading Software such as CDEGS and we follow key local and international standards such as AS 2067, AS 3000, AS 7000, AS 3007, AS 4853, AS 3835, ENA EG1, ENA EG0, IEEE 80 and IEEE 81.
- Lightning Protection Studies
- Insulation Coordination Studies
- Refer to our “Power System” section for further information about transient studies
We can address the deficiencies in electrical systems while identifying the potential to save energy and meeting future needs with existing assets. Our engineers are proficient in using some of the worlds most advanced power system analysis tools including DigSILENT, PSSE, PSCAD, Etap™ and others. The analysis covers both large and small networks as well as grid connected and isolated microgrids. We provide the following services:
- Network Planning
- Concept Design planning, staging and sizing
- Load Flow Studies
- Short Circuit Studies
- Power Quality Analysis
- Harmonics Studies
- Arc Flash Studies
- Dynamic Studies
We offer advanced capability in performing transient studies including the following types of assessments:
- Lightning Surges (Backflash)
- Transient Recovery Voltage (TRV) Analysis
- Arrester Duties and Insulation Coordination
- Switching Surge Analysis
- Capacitor Bank and Shunt Reactor Switching
- Transmission Line and Distribution Feeder Energizing
- Transformer Switching and Dynamic Overvoltages
- Ferroresonance / Parallel Linear Resonance
- Motor Starting and Motor Transients
- Inverter or other power electronic based switching
Energyze provides secondary system services for the protection and control of power system components.
We provide the following key services:
- New protection, automatic control and metering system design
- Existing system refurbishment/replacement, including designing AC and DC schematic drawings and determining CT / VT requirements
- Equipment Selection from key vendors such as SEL, ABB, Siemens, Schneider, GE and others
- Setting and configuration of protection, control and metering systems, such as IEC 61850 designs and integration
- Power system modelling and grading/coordination studies
- Protection scheme setting and design review
- Protection designs and settings for compliance with relevant Technical Codes
- Bench Testing
- Factory Acceptance Testing
- Site Acceptance Testing
- Integrated Testing and commissioning
Energyze personnel have extensive experience in SCADA and Automation systems and this is core to our ability to choose the best technologies for each application and integrate these as a solution for the client.
Energyze personnel have worked on major Substation Automation projects incorporating protection, IEC61850 and SCADA functions into a consolidated automation solution.
Energyze provide SCADA and control systems services on industrial facilities and mine sites. We work with RTU, PLC and HMI platforms as well as energy management systems for process and non process infrastructure.
The key services we provide:
- Concept and Feasibility design
- Solution Specification
- Solution design including design drawings and procurement packages
- Hardware procurement
- Software configuration
- Software system testing (FAT / SAT)
- Process optimization, system performance monitoring
- Operating and maintenance training and documentation
We provide telecommunications network design and associated services. Our personnel can
manage the successful delivery of projects from concept through to commissioning and maintenance. We work with OPGW, Fibre, Radio, Microwave, Telemetry, design of backbone networks, long haul, point to point networks and other systems.
- Wireless Carrier (VHF, UHF, Microwave Backhaul and Mesh)
- High level RF Planning;
- Cable Carrier Systems (Pilot Wire, Metallic, Optical Fibre, Power Line Carrier)
- Civil design
- Network Access Solutions
- TDM Networks such as SDH and PDH
- Layer 2 and Layer 3 Ethernet Networks
- MPLS Networks
- Telecommunications Power (AC and DC Power)
We support the following services
- Voice and Telephony (POTS and VOIP)
Digital Mobile Radio (DMR)
- Distribution Automation
- Advanced Metering
- Transmission SCADA
- Protection – Tele-protection and – Digital
- Corporate Connectivity
Communications Network Management
Energzye has specialist experience in the delivery of civil and structural designs to support power and renewables projects. These skills extend to other infrastructure, industries and client groups as well. The services we offer include:
- Civil Works including Bulk Earthworks
- Access Roads
- Flood Studies & Waterway Assessments
- Hydrology & Flood Protection Design
- Seismic and Wind Loading Analysis
- Building Design (Transportable and Permanent)
- Structure Design
Drafting
When you need accurate drawings of your project, Energyze can provide the necessary design and drafting services to match. Energyze provides professional services relating to a wide variety of civil, structural, mechanical, architectural and electrical applications. We work with the latest software such as Microstation, AutoCAD and others to produce high quality 2D and 3D designs .
- 3D Modelling
- Drafting
- As Builts
- Data validation
Power System Modelling (Steady State and Dynamic)
Power Quality Studies
- GPS Studies and Connection Agreements
Model development, Testing and Model Validation
R1 / R2 submissions and R2 testing
Inverter based technology modelling and studies
Network Planning and Operational studies
Owner’s Engineer
Project Development
Tender Management
Cost and Schedule Management
Contract Management
Design Management
Risk and Safety Management
Independent Engineering
Independent Reviews
The ultimate step of any project is the commissioning phase which aims to prove the correct functioning of the built asset prior to handover. Commissioning requires specialist skills and extensive experience to ensure that all functionality is tested correctly and failure modes are adequately mitigated. The Energyze team offers the following services:
- Commissioning Management
- Construction Support
- Bench Testing
- Factory Acceptance Testing and Support
- Preparation of ITP’s. ITR’s and Commissioning plans
- Site Acceptance Testing and Support
- Hold point testing, R2 Validation and Performance Guarantee Testing
- Commissioning Approvals Management
- AEMO and TNSP negotiations and approvals